PC Tail shielded contacts provide a cost effective packaging solution for limited space applications where connectors are attached to printed circuit boards. High reliability is assured with factory pre-assembled contacts and standardized termination to the board. PC Tail contacts are available for MIL-DTL-38999 Series I.
For improved performance we recommend Milnec compatible MIL-DTL-38999 Series I style connectors.
- SAE-AS39029: Mating interface meets or exceeds the requirements and specifications of M39029/56-352, except as indicated
- Contact Material: Suitable copper alloy
- Hood Material: Stainless Steel
- Contact Finish: Gold plate per IAW ASTM B488-01, Type II, Code C, Class 1.25 (.000050 Min) over nickel IAW AMS QQ-N-290, Class 1, .000050-.000100 thick
- Hood Finish: Passivated
MIL-DTL-38999 Series I – #16 PCB Socket Contact Dimensions
|Part Number||Popular||A||B||C||D Dia||Shoulder Style||E Tail Stickout‡ DL02, DL03 Shells||E Tail Stickout‡ DL00, DL04, DL07 Shells|
|DLST16-101||★||1.401 (35.59)||.546 (13.87)||.234 (5.94)||.040 (1.02)||Beveled||.455 (11.56)||.250 (6.35)|
|DLST16-102||1.471 (37.36)||.474 (12.04)||.376 (9.55)||.040 (1.02)||Beveled||.525 (13.34)||.320 (8.13)|
|DLST16-103||1.482 (37.64)||.627 (15.93)||.234 (5.94)||.040 (1.02)||Beveled||.536 (13.61)||.331 (8.41)|
|DLST16-104||★||1.494 (37.95)||.413 (10.49)||.460 (11.68)||.040 (1.02)||Beveled||.548 (13.92)||.343 (8.71)|
|DLST16-105||1.607 (40.82)||.752 (19.10)||.234 (5.94)||.040 (1.02)||Beveled||.661 (16.79)||.456 (11.58)|
★ Popular: Most Popular Call-Outs, Best In-Stock Solutions
‡ Extension Tolerances: ± 0.02 (0.5mm)
Note: #22M and #22D contacts are interchangeable. Tail stickout dimensions are for Milnec connectors. When used in compatible connectors from other brands, dimensions can vary as much as ±0.10 inches due to manufacturing differences.
How To Order Your Milnec MIL-DTL-38999 Series I Type Connector with PCB Contacts
To quickly order your 38999 connector prefilled with your preferred PC tail contacts, take your connector part number and replace the P (pin) or S (socket) with X (PC tail pin) or Y (PC tail socket) and simply add the Dash Number of the preferred contact tail length. For example to order a DL07W11-35PN with DLPT22-106 PC tail contacts, order DL07W11-35XN-106.