MIL-DTL-26482 Series 1 Type Crimp Connectors

MIL-DTL-26482 Series 1 Crimp Connectors & Accessories

 

High-Performance, Crimp Connectors

The HR Series of connectors provides the performance of mil-spec connectors with the reliability of crimp contacts. HR connectors are based on MIL-DTL-26482/MIL-C-26482 Series 1 military standards and are fully compatible with all military and commercial derivatives. These connectors feature bayonet coupling, high-density inserts with gold plated crimp contacts, and an integrated environmental resistant backshell. The HR Series also offers many modern options that are unavailable in the mil-spec, including thru-bulkhead and hermetic receptacles, a large selection of insert arrangements, and a variety of protective sealing accessories.

For additional help in specifying your 26482 connector solution, please contact a Milnec sales professional, or your authorized distributor for technical and sales support.

Milnec COTS products are not qualified through the DLA and are not listed on the QPL.

HR Series Features & Benefits

  • Mil-Spec Compatible – 100% compatible with MIL-DTL-26482 Series 1
  • Complete Kits – Get complete backshell and sealing accessories with your connector
  • Quick Delivery – Short production lead-times on most items


MS3126 Type Straight Plug • (HR06)

Description

This MS3126 type plug is compatible with all MIL-DTL-26482 Series 1 receptacles. It features an integrated wire sealing splash-proof backshell, while cable clamps provide necessary cable strain relief. Always use a protective cover when plug is disconnected to protect contacts from environmental contaminants and impact.

Cross-Reference & Compatibility

Compatible BrandsEquivalentsMates
MIL-DTL-26482 Series 1 CrimpMS3126MS3120, MS3121, MS3122, MS3124
AmphenolPT06SEPT00SE, PT01SE, PT02SE, PT07SE
ArrayPWF06PWF00, PWF01, PWF02, PWF07
ITT CannonKPSE06KPSE00, KPSE01, KPSE02, KPSE07
Souriau8510685100, 85101, 85102, 85107

MIL-26482 Series 1 Crimp Type Right Angle Plug • (HR08)

Description

The HR08 right angle plug is compatible with all MIL-26482 receptacles and features a 90° angled backshell, making it ideal for coupling in tight or difficult spaces. The 90° elbow also provides simple cable management. The integrated wire sealing splash-proof backshell provides environmental protection, while a cable clamp provides necessary cable strain relief.

Compatibility

Compatible BrandsEquivalentsMates
MIL-DTL-26482 Series 1 CrimpMS3120, MS3121, MS3122, MS3124
AmphenolPT08SEPT00SE, PT01SE, PT02SE, PT07SE
ArrayPWF08PWF00, PWF01, PWF02, PWF07
ITT CannonKPSE08KPSE00, KPSE01, KPSE02, KPSE07
Souriau8510885100, 85101, 85102, 85107

MS3120 Type Wall Mount Receptacle • (HR00)

Description

The MS3120 type wall mount receptacle has a standard four-hole flange for mounting on the front or rear of a panel. The integrated wire sealing splash-proof backshell provides environmental sealing and strain relief protection. Covers are recommended to protect the contacts from damage.

Cross-Reference & Compatibility

Compatible BrandsEquivalentsMates
MIL-DTL-26482 Series 1MS3120MS3126
AmphenolPT00SEPT06SE, PT08SE
ArrayPWF00PWF06, PWF08
ITT CannonKPSE00KPSE06, KPSE08
Souriau8510085106, 85108

MS3122 Type Box Mount Receptacle • (HR02)

Description

The HR02 (MS3122 type) box mount receptacle offers a low-profile rear design without accessory threads, permitting it to be mounted in confined spaces. A gasket is recommended to seal the mounting location.

Cross-Reference & Compatibility

Compatible BrandsEquivalentsMates
MIL-DTL-26482 Series 1MS3122MS3126
AmphenolPT02SEPT06SE, PT08SE
ArrayPWF02PWF06, PWF08
ITT CannonKPSE02KPSE06, KPSE08
Souriau8510285106, 85108

MS3124 Type Jam Nut Receptacle • (HR07)

Description

The MS3124 type jam nut receptacle provides increased environmental protection due to its single mounting hole. An integrated silicone O-ring offers additional sealing while the integrated wire sealing splash-proof backshell provides environmental sealing and strain relief.

Cross-Reference & Compatibility

Compatible BrandsEquivalentsMates
MIL-DTL-26482 Series 1MS3124MS3126
AmphenolPT07SEPT06SE, PT08SE
ArrayPWF07PWF06, PWF08
ITT CannonKPSE07KPSE06, KPSE08
Souriau8510785106, 85108

MS3121 Type In-Line Receptacle • (HR01)

Description

MS3121 type in-line or cable mount receptacles are ideal for extension cord applications. A reduced flange with rounded corners protects the connector from impact when the attached cable is dragged or dropped. The integrated wire sealing splash-proof backshell provides environmental protection and cable strain relief. A dust cover is recommended to seal and protect the contacts from damage.

Cross-Reference & Compatibility

Compatible BrandsEquivalentsMates
MIL-DTL-26482 Series 1MS3121MS3126
AmphenolPT01SEPT06SE, PT08SE
ArrayPWF01PWF06, PWF08
ITT CannonKPSE01KPSE06, KPSE08
Souriau8510185106, 85108

MIL-26482 Series 1 Crimp Type Bulkhead Feed-Thru Receptacle • (HR22)

Description

This unique connector is designed with receptacles on both sides of the shell in order to pass a signal through bulkheads or panels. It is compatible with MS3126 cable plugs. The long side of the shell features socket contacts, the short side pin contacts. A mounting bracket and gasket are recommended.

Compatibility

Compatible BrandsMates
MIL-DTL-26482 Series 1 CrimpMS3126
AmphenolPT06SE, PT08SE
ArrayPWF06, PWF08
ITT CannonKPSE06, KPSE08
Souriau85106, 85108

MIL-26482 Series 1 Crimp Type Hermetic Box Mount Receptacle • (HR12)

Description

Hermetic box mount receptacles are made with high-strength carbon steel shells and glass inserts to create a true airtight seal for MIL-26482 applications requiring the best in environmental protection. A low-profile rear design allows them to be mounted in cramped enclosures. A gasket and mounting bracket with sealing screws are recommended to help maintain a hermetic seal.

Compatibility

Compatible BrandsMates
MIL-DTL-26482 Series 1MS3126
AmphenolPT06SE, PT08SE
ArrayPWF06, PWF08
ITT CannonKPSE06, KPSE08
Souriau85106, 85108

MIL-26482 Series 1 Crimp Type Hermetic Jam Nut Receptacle • (HR13)

Description

MIL-26482 compatible hermetic jam nut receptacles are preferred for hermetic applications because of their a single-hole mount design and an integrated silicone O-ring to seal the installation. A cover is recommended to keep the contacts clean and dry.

Compatibility

Compatible BrandsMates
MIL-DTL-26482 Series 1MS3126
AmphenolPT06SE, PT08SE
ArrayPWF06, PWF08
ITT CannonKPSE06, KPSE08
Souriau85106, 85108

MIL-26482 Series 1 Crimp Type Hermetic Solder Mount Receptacle • (HR19)

Description

The MIL-26482 compatible solder mount hermetic receptacle comes with a reduced flange designed for mounting to a panel. The smaller footprint permits the connector to be installed in high densities or on probes or sensors. A dust cover is recommended for contact protection.

Compatibility

Compatible BrandsMates
MIL-DTL-26482 Series 1 CrimpMS3126
AmphenolPT06SE, PT08SE
ArrayPWF06, PWF08
ITT CannonKPSE06, KPSE08
Souriau85106, 85108

MIL-26482 Series 1 Crimp Type Dust Covers • (HRCP/HRCR)

Description

MIL-26482 style connectors should always be paired with protective covers to environmentally seal and protect the contacts from impact or damage. Covers also keep dirt and debris from the coupling mechanism, ensuring reliable mating every time.

Compatibility

Compatible BrandsPlugsReceptacles
MIL-DTL-26482 Series 1MS3126MS3120, MS3121, MS3122, MS3124
AmphenolPT06SE, PT08SEPT00SE, PT01SE, PT02SE, PT07SE
ArrayPWF06, PWF08PWF00, PWF01, PWF02, PWF07
ITT CannonKPSE06, KPSE08KPSE00, KPSE01, KPSE02, KPSE07
Souriau85106, 8510885100, 85101, 85102, 85107

MIL-26482 Series 1 Crimp Type Dummy Receptacle • (HRCD)

Description

Dummy receptacles prevent operator injury or connector damage by providing a safe place to stow and organize unused cables. Protective covers are recommended to always keep stowage receptacles clean and dry. Compatible with all MIL-26482 connectors.

RoHS Compliant Finishes Available

rohs-leafReview alternate MIL-DTL-26482 Series 1 RoHS Finish & Materials options available to meet your application requirements for color, temperature, and corrosion-resistance.

Compatibility

Compatible BrandsPlugs
MIL-DTL-26482 Series 1MS3126
AmphenolPT06SE, PT08SE
ArrayPWF06, PWF08
ITT CannonKPSE06, KPSE08
Souriau85106, 85108

MIL-26482 Series 1 Crimp Type Mounting Gaskets • (HRGE)

Description

These mounting gaskets are sized to fit MIL-26482 mil-spec connectors and will seal the mounting space between receptacles and a panel to maintain the environmental integrity of an enclosure. They may be used in either rear or front mount receptacle installations.

Compatibility

Compatible BrandsReceptacles
MIL-DTL-26482 Series 1 CrimpMS3120, MS3122
AmphenolPT00SE, PT02SE
ArrayPWF00, PWF02
ITT CannonKPSE00, KPSE02
Souriau85100, 85102

MIL-26482 Series 1 Crimp Type Mounting Bracket • (HRMB)

Description

Mounting brackets add strength to mounting panels. The captive stainless steel locking nuts prevent loose fasteners from falling into susceptible areas, which may cause equipment failure. Optional sealing screws with O-rings will effectively seal the mounting holes on your enclosure from water ingress. Compatible with all MIL-26482 connectors.

Compatibility

Compatible BrandsReceptacles
MIL-DTL-26482 Series 1MS3120, MS3122
AmphenolPT00SE, PT02SE
ArrayPWF00, PWF02
ITT CannonKPSE00, KPSE02
Souriau85100, 85102

MIL-26482 Series 1 Type Crimp Contacts

Description

MIL-DTL-26482 Series 1 crimp contacts are available discretely in sizes #16 and #20 for replacement of bent or damaged pins. Don’t let a damaged contact ruin your connector. Be sure to have extra contacts on hand for your Milnec interconnect solution.

Cross-Reference & Compatibility

Compatible BrandsPlugsReceptacles
MIL-DTL-26482 Series 1MS3126MS3120, MS3121, MS3122, MS3124
AmphenolPT06SE, PT08SEPT00SE, PT01SE, PT02SE, PT07SE
ArrayPWF06, PWF08PWF00, PWF01, PWF02, PWF07
ITT CannonKPSE06, KPSE08KPSE00, KPSE01, KPSE02, KPSE07
Souriau85106, 8510885100, 85101, 85102, 85107

Mil-26482 Series 1 Crimp Tool

Description

A precision crimp tool enables termination of contacts for MIL-26482 Series 1 crimp connectors. Our tools feature an eight impression crimp, which ensures maximum tensile strength between wire and contact. The cycle controlled ratchet is consistent and accurate and does not permit half crimps, ensuring complete and precise crimping every time. See the contact specific table for the correctly sized tool.

Compatibility

Compatible BrandsPlugsReceptacles
MIL-DTL-26482 Series 1MS3126MS3120, MS3121, MS3122, MS3124
AmphenolPT06SE, PT08SEPT00SE, PT01SE, PT02SE, PT07SE
ArrayPWF06, PWF08PWF00, PWF01, PWF02, PWF07
ITT CannonKPSE06, KPSE08KPSE00, KPSE01, KPSE02, KPSE07
Souriau85106, 8510885100, 85101, 85102, 85107

Mil-26482 Series 1 Contact Insertion & Removal Tools

Description

Plastic contact insertion and removal tools come with every Milnec Mil-DTL-26482 Series 1 crimp style connector. They offer a convenient solution for connector repair in the field. However, some applications demand more durable and precise tooling. Our stainless steel contact insertion and removal tools are the best option for production environments where higher tool reliability is required.

Compatibility

Compatible BrandsPlugsReceptacles
MIL-DTL-26482 Series 1MS3126MS3120, MS3121, MS3122, MS3124
AmphenolPT06SE, PT08SEPT00SE, PT01SE, PT02SE, PT07SE
ArrayPWF06, PWF08PWF00, PWF01, PWF02, PWF07
ITT CannonKPSE06, KPSE08KPSE00, KPSE01, KPSE02, KPSE07
Souriau85106, 8510885100, 85101, 85102, 85107